New screw presenter model 1211-ES-K

 

by Lori A Logan

 

 

back

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

General info:

 

With this type of screw presenters, DEPRAG has widened its product range. The operator can use a magnet bit or vacuum system to pick-up the screws near the assembly position and pull them towards the workpiece. When removing a screw, a micro switch releases a “reload” signal to present the next screw to the pick-up position.

 

The screw presenter’s housing is made from stainless steel. The slim design allows the installation of several of these presenters on one working area. On the rear side of the device are adjustment buttons for frequency, amplitude and operating duration. The whole unit is slightly more robust and heavier than the current SG 1211-ES version.

 

 

Use:

 

This screw presenter is suited for applications where the use of a complete Screwfeeding machine is  not economical or where the volume does not justify such an investment. One difference, when compared to the currently offered screw presenters, is that this new line of screw-presenters can be used for screw shaft diameter of as low as 1.0 mm [0.039-inches]. Actually, the new guide rails are available  for shaft diameters of 1.0 [0.039-inches] and 1.2 mm [0.047-inches].

 

 

Accessories:

 

The equipment of this new type 1211-ES-K is NOT compatible with the already existing 1211-ES. Please refer to the respective DEPRAG part numbers for the 2 available basic units and the available 8 guide rails [below]. For each screw presenter, one guide rail and one power unit is necessary and needs to be selected.

 

 

Part no.

 

 

 

For Rail

For Presenter

Model

Description

 

 

 

 

 

 

   

407254 A

1211-ES-K/12

SCREW PRESENTER – BASIC

 

832470

 

1211-K-10

Guide rail

 

832471

 

1211-K-12

Guide rail

 

832472

 

1211-K-14

Guide rail

 

832473

 

1211-K-17

Guide rail

 

832474

 

1211-K-20

Guide rail

 

 

407255 A

1211-ES-K/23

SCREW PRESENTER – BASIC

 

832475

 

1211-K-23

Guide rail

 

832476

 

1211-K-26

Guide rail

 

832477

 

1211-K-30

Guide rail

 

 

 

 

 

 

 

407636 A

SG-K-230V/50Hz

Power unit – basic

 

 

407637 A

SG-K-115V/60Hz

Power unit – basic

 

 

 

 

 

 

 

Technical data:

 

Type

Part no.

1211-ES-K/12

407254 A

1211-ES-K/23

407255 A

Max. feeding capacity (parts / min.)

60

60

Filling volume (liters)

0,05

0,05

Voltage

15 V DC

15 V DC

Amperage (mA)

1000

1000

Size (w x d x h) in mm

55 x 205 x 142,5

55 x 205 x 142,5

Weight (kg) / lbs.

2,4 / 5

2,4 / 5.3

 

 

 

 

 

Availability:

 

This series of screw presenter will be available within 4 - 6 weeks. In the future, this new model will replace the existing presenter up to a screw shaft dia. of 3 mm. Once existing stock has been used up (probably by the end of May 2007), the new presenter will be available from stock. Since we have over 950 of the current unit on the market, we will naturally provide spare parts.

 

 

 

 

 

back