|
Effective immediately, DEPRAG offers an assortment of
three Linear Stands, each having a different work area and allowing for
much higher reaction-torque absorption.
There are three (3) separate Stands, having the following
specifications:
|
For maximum
|
Work Area A
|
Height h
|
Height H
|
Weight of
|
|
|
Torque
|
mm
|
mm
|
mm
|
horizontal Arm
|
Part No.
|
|
Nm / in.lbs.
|
inch
|
inch
|
inch
|
Kg / lbs
|
|
|
20 / 177
|
295 650
11.6 25.6
|
120 880
4.7 34.6
|
1220
48.0
|
3 / 6.6
|
408010 A
|
|
50 / 443
|
300 770
11.8 30.3
|
180 820
7.1 32.3
|
1220
48.0
|
6 / 13.2
|
408010 B
|
|
150 / 1,330
|
300 770
11.8 30.3
|
195 785
7.7 30.1
|
1220
48.0
|
10 / 22
|
408010 C
|
It is important to keep in mind that these new Stands do
not include the necessary Balancer there are just too many possible variations.
To select the correct Balancer, use the weight of your Tool to be suspended
and add the weight of the Stands horizontal Arm. Your Balancer has to have
a sufficient weight capability to support the combined weight of Tool and
Arm. Generally, we recommend the use of two (2) Balancer part number
827678A (when used with a Tool weighing less than 2 pounds). If a heavier
tool is to be suspended, or if a Screwdriver has a Screwfeeder-Tooling
attached, then Balancers - having a higher weight capacity - must be
installed.
Please refer to the pictures on the left and view the
major dimensions as well as a selection chart for standard and special
screwdriver holding-brackets in our downloadable catalog pages 12 and 13.
These Linear Stands
are available effective immediately at a quite substantially reduced cost.
Please call or e-mail us for a Quotation.
For more details on all of the DEPRAG Accessories, please download our
catalog.
To read about other New Products, please click HERE.
|
