|
 DEPRAG is very proud to announce a totally new product, the MINIMAT-QC.
This new Screwdriver is air-operated
and has the proven and highly precise DEPRAG shut-off clutch integrated.
Additionally the tool is equipped with a torque transducer, which displays
the achieved torque on the QC-Controller ME1000QC.
However, the most intriguing feature is the, directly on the Screwdriver integrated LED,
which gives the Operator a visual display whether the assembly is considered
OK [green LED] or
NOT OK [red LED]
Naturally, the controller also
allows the evaluation and processing of the torque values, direction of
rotation, screwdriving time and it also includes a counter verifying that
all screws [if multiple screws are driven into one product] were actually
assembled into the product.
The Controller will display the
following error messages, if a NOT O.K. assembly occurs:
-
screwdriving time too long / too
short
-
Torque too low / too high
-
Incorrect drive direction
-
Not all screws were assembled
The precision level of the
integrated transducer is less than 3% standard deviation. For more
technical specifications as well as design forms currently available,
please use the following LINK to view our catalog.
As you can see from the catalog, the
MINIMAT-QC is currently available as straight [inline] tools with a torque
range from 4 – 177 in.lbs. and as an Angle-Head tool having a torque range
of 36 – 310 in.lbs.
|
