|
Tip of Tool with
½”-20 UNF thread
Drill Chucks (keyed
and keyless) with ½”-20 UNF thread
Bit Holder with ¼”
female hex drive
(for direct drive)
Slip-Clutch
attachment with ¼” female hex drive
(Operator lifts tool to stop slip clutch)
Automatic-Clutch
attachment with ¼” female hex drive
(Preset clutch will shut-off the tool at correct torque)
|
DEPRAG is proud to announce a new
Power Tool, the VARIOMAT. This
multi-purpose tool allows many different operations, using the same tool.
It can drill holes and drive screws to either depth or torque. The VARIOMAT is designed with the same perfectly balanced ergonomic
housing-grip as the well-known DEPRAG Screwdrivers. For more technical
specifications as well as dimensions, please use the following LINK to view a product catalog.
To change from one process to the
next, simply attach the appropriate tooling (see left) and you are ready
for your task! Because of the ½”-20 UNF thread on the tip of the tool,
standard over-the-counter available drill chucks may be attached.
The tool is rated at 1,900 rpm. It
can drill holes up to ⅜” and reaches a stall torque of 50 inch pounds. If an
automatic clutch is attached, the maximum torque is
44 inch pounds. Please use this E-Mail Link to request a written Quote!
DEPRAG VARIOMAT
|
